Skip to content

Make a Measurement

Initial Steps

This guide explains the setup and measurement process using one of the IRIS kits, but a similar procedure would apply to other sets of hardware.

Before you set up any equipment, please familiarise yourself with the hardware in your IRIS kit.

Make a Measurement

For Revision 3 kits which use a RĂ˜DE NT-SF1 and Dante network, start here.

For earlier revision kits (1 and 2) which use a USB audio interface and a Core Sound TetraMic, follow these instructions.

Tip

All equipment should be powered from the same AC outlet. This will reduce chance of buzzing in the input and output signals due to ground loops.